|
|
| Measuring Transducers |
 |
 Measuring transducers are instruments used for conversion of electrical quantities in single and three phase electrical systems. Input-output characteristics can be created with five breaking points for unipolar and bipolar output signals. They can be used in places where you need analogue output quantities as input into another device. Except for »classical« analogue outputs, our measuring transducers can also provide you with tariff and pulse outputs for monitoring different tariffs or as PLC inputs. Together they can have up to three different outputs. Communication, outputs and auxiliary power supply are electrically insulated from other system. Transducers can be programmed via serial port. Data used for system analyses can be send to a PC. They can measure single or multiple electrical parameters. Their input can be AC or DC. Our transducers are the answer for practically your every need.
 |
MI 400
|
| The MI 400 programmable measuring transducer supervises an electrical system. A large input range allows use of transducer for measuring any standard AC current and voltage. |
 |
MI 401
|
| The MI 401 programmable measuring transducer supervises quantities of an electrical system. A large input range allows use of transducer for measuring of any standard AC current and voltage. |
 |
MI 458
|
| The MI 458 measuring transducer is designed for use in industrial process for conversion of DC current in to appropriate DC current or DC voltage signals. |
 |
MI 456
|
| The MI 456 measuring transducer is designed for use in industrial processes for conversion of DC voltage into appropriate DC current or DC voltage signals. |
 |
MI 454
|
| The MI 454 measuring transducer is designed to convert the wiper position of a potentiometer or slide wire into an accurate proportional DC current or DC voltage signals. |
 |
MI 452
|
| The MI 452 measuring transducer is designed for use in industrial processes for conversion of resistance into appropriate DC current or DC voltage signals. |
 |
MI 450
|
| The MI 450 measuring transducer is designed for use in industrial processes for conversion of nonlinear resistance sensors (RTD – sensors) into appropriate DC current or DC voltage signals. |
 |
MI 438
|
| The MI 438 programmable measuring transducer allows simultaneous measuring of three currents of the same frequency. |
 |
MI 436
|
| The MI 436 programmable measuring transducer allows simultaneous measuring of three voltages of the same frequency with a common zero (three phase system). |
 |
MI 421
|
| The MI 421 programmable power factor measuring transducer converts input quantities into DC current or DC voltage proportional to the measured power factor. |
 |
MI 420
|
| The MI 420 programmable frequency transducer converts a frequency of sinusoidal voltage signal into a load-independent DC current or a load-independent DC voltage. |
 |
MI 418
|
| The MI 418 measuring transducer converts an AC current into a load-independent DC current or a load-independent DC voltage. |
 |
MI 416
|
| The MI 416 measuring transducer converts an AC voltage into a load-independent DC current or a load-independent DC voltage. |
 |
MI 414
|
| The MI 414 measuring transducer measures reactive power and converts input AC quantities into DC voltage or current programmable output, proportional to the measured value. |
|
MI 413
|
| The MI 413 measuring transducer measures active power and converts input AC quantities into DC voltage or current programmable output, proportional to the measured value. |
 |
MI 408
|
| The MI 408 measuring transducer converts sinusoidal AC current signals into proportional DC current signals. |
 |
MI 406
|
| The MI 406 measuring transducer converts sinusoidal AC voltage signals into proportional DC current signals. |
|
|
|
|
| ###PROMOTION### |
 |
|
| News |
|
10-02-05
Updated MINET and MISET software
|
|
18-02-05
New power meter and power factor meter
|
|
10-03-05
Updated MIREC software
|
|
17-03-05
Communication Adapters
|
|
31-03-05
Dial Printing Technology Demo
|
|
01-04-05
MODBUS protocol table
|
|
25-04-05
Updated MISET software
|
|
23-08-05
Web site also in Slovenian language
|
|
29-08-05
MODBUS protocol table also for measuring centres
|
|
|
|
|
|
|
|
